SYSTEM / Electrical System PILOT SHUT-OFF CIRCUIT (KEY SWITCH: ON) 1. When the pilot shut-off lever is turned to the UNLOCK position, the pilot shut-off switch is turned ON. 2. Electrical current from fuse #4 flows to the ground through the pilot shut-off relay and pilot shut-off switch so that the pilot shut-off relay is excited. 3. At the same time, the starter cut relay is connected to the ground circuit. 4. When the pilot shut-off relay is excited, the ground in pilot shut-off solenoid valve is connected to the ground through the pilot shut-off relay and security relay. 5.
Therefore, the pilot shut-off solenoid valve is turned ON, pressure oil from the pilot pump is routed to the pilot valve. 6. When the key switch is turned to the START position, the starter cut relay is excited. 7. When the starter cut relay is excited, the circuit between terminal ST in the key switch and terminal S in starter relay 2 is blocked. 8. Therefore, when the pilot shut-off lever is in the UNLOCK position the key switch is turned to the START position, the engine does not start. T2-5-18