hitachi — T03-06-01to16.pdf

COMPONENT OPERTATION / Control Valve BYPASS SHUT-OUT VALVE The bypass shut-out valve is provided in the rear of 4-spool and 5-spool section circuits. The bypass shut-out valve blocks the neutral circuit (return circuit to hydraulic oil tank) in 4-spool and 5-spool sections so that pressure oils in pumps 1 and 2 are combined. Therefore, amount of oil which flows to the cylinder increases and speed of the cylinder increases. NOTE: The bypass shut-out valve in 5-spool section is not used for the machine control. Operation 1.

When the attachment is operated on the machine equipped with a attachment (optional), pilot pressure from the pilot valve (optional) shifts the bypass shut-out valve in 4-spool section. 2. Therefore, as the neutral circuit in 4-spool section is blocked, pressure oil from pump 1 flows to the 5-spool section, is combined with pressure oil from pump 2 so that combined pressure oil is supplied to the auxiliary spool. 3. Consequently, speed of the attachment (optional) increases. T450-03-03-050 To Hydraulic Oil Tank NOTE: The illustration shows the bypass shut-out valve in 4-spool section. T3-3-40 From Pump 1 Attachment Pilot Pressure (Optional)