COMPONENT OPERATION / Others (Undercarriage) TRACK ADJUSTER The track adjuster consists of spring (5) and adjuster cylinder (6), and is supported by the side frame. Spring (5) absorbs loads applied to the front idler. Piston rod (8) adjusts track sag. Grease is applied through the grease fitting into part a of adjuster cylinder (6). Grease pushes piston rod (8) and decreases track sag. In order to increases track sag, loosen the hexagonal part of valve (1) 1 to 1.5 turns counterclockwise and release grease. 1 Hexagonal Part Grease Fitting CAUTION: Adjuster cylinder (6) is highly pressurized.
As valve (1) may fly out and the highly pressurized grease may spout out, do not loosen valve (1) quickly and/or excessively. Keep face and body parts away from valve (1) and loosen valve (1) slowly and gradually. In addition, do not loosen the grease fitting. Grease Discharge Hole T1J1-03-08-002 a 1 2 3 4 5 6 7 8 T1J1-03-08-001 1 - Valve 3 - Washer 5 - Spring 7 - Flange 2 - Nut 4 - Spacer 6 - Adjuster Cylinder 8 - Piston Rod T3-8-3