Kubota — Changing Display Mode

28 OPERATING THE TRACTOR PTO RPM / TRAVEL SPEED MONITOR B Changing Display Mode 1. The LCD monitor gives two different display modes: "Traveling speed and Hour meter" and "Traveling speed and PTO speed". Each time the PTO/Hour meter select switch is pressed, the mode is switched to the changing display. 2. To switch between "mph" and "km/h" for the traveling speed, use the Traveling speed select switch. 3. The PTO clutch control switch works for the following automatic display modes. 1) PTO clutch control switch ON: Traveling speed and PTO speed are displayed. 2) PTO clutch control switch OFF: Traveling speed and Hour meter are displayed.

(1) LCD monitor (2) Hour Meter indication (3) PTO Indication (4) PTO / Hour Meter Select Switch (5) Traveling Speed Select Switch