PTO 36 B PTO Gear Shift Lever B LCD Monitor Message 1. The PTO rpm can be checked in the LCD monitor. (See "PTO RPM / TRAVEL SPEED MONITOR" in "OPERATING THE TRACTOR" section.) 2. When the PTO system gets engaged (ON), the indicator lights up. To avoid personal injury or death: A Be sure to observe the PTO shaft speed prescribed for the individual implements. It is extremely dangerous to run an implement at high speed that is meant to be operated at low speed. Use only when this higher rpm is specifically recommended by the implement manufacturer. The PTO gear shift lever can be set to either 540 rpm or 540E rpm positions.
Move this lever to either position with the PTO clutch control switch set to "OFF". (1) LCD monitor (2) PTO clutch indicator (1) PTO gear shift lever (A) 540 rpm (B) 540E rpm A When light load, select the "540E" position for economical operation.