Kubota — Using the Wipers in Cold Season

51 CAB OPERATION B Rear Work Light (1) Rear work light (1) Front wiper / washer switch (2) Rear wiper / washer switch WIPER B Front Wiper / Washer Switch 1. Turn on the key switch and press the top half of the wiper switch to the first step, the wiper is activated. When the switch is pressed further to the second step, washer liquid jets out. The jetting continues while the switch is pressed and the wiper is activated continuously. 2. Press the bottom half to the first step, the wiper is activated at regular intervals. When the switch is pressed further to the second step, washer liquid jets out and the wiper is activated at regular intervals.

A Do not activate the wipers when the windows are dry, they may be scratched. Be sure to jet washer liquid first and then activate the wipers. B Using the Wipers in Cold Season 1. While not used in cold season, keep the wiper blades off the windshield to prevent them from being stuck with ice. 2. If the windshield is covered with snow, scrape it off the windshield before using the wipers. 3. If the wiper blades are stuck on the windshield with ice and fail to move, be sure to turn the main key switch to "OFF" and remove the ice off the blades. Then place the main key switch back to "ON". 4.

When commercially available cold-season wiper blades are used, make sure their size is the same as or smaller than that of the standard ones. B Rear Wiper / Washer Switch 1. Turn on the key switch and press the top half of the wiper switch to the first step, and the wiper is activated. When the switch is pressed further to the second step, washer liquid jets out. The jetting continues while the switch is pressed and the wiper is activated continuously. 2. Press the bottom half of the wiper / washer switch, washer liquid only jets out. A In cold season, the wiper blades and the wiper motor might get overloaded causing damage. To avoid this, be sure to take the above precautions.