Komatsu — STEERING VALVE

STRUCTURE AND FUNCTION STEERING VALVE ! When the steering wheel is at neutral, centering spring (12) makes spool (3) and sleeve (5) stop at a position where center pin (4) is at the center of the oblong hole in spool (3). At this point, pump port A of the sleeve and ports E, F, and G to the steering cylinder and Girotor, and vertical grooves B, C, and D of the spool are shut off. However, orifice a of pump port A is connected to orifice d (connected to drain port H) of the spool. Orifice b of port J from the priority valve is connected to vertical groove B of the spool. In addition, port K of the sleeve is connected to drain port L of the spool and vertical groove B. !

By shutting off and connecting these ports and grooves, the oil from the pump passes from port A through orifices a and d, and is drained to the hydraulic tank. In addition, the oil which forms the pilot pressure of the priority valve passes from port J through orifice b, then through vertical groove B and port K, and is returned to the hydraulic tank from port L. 10-65