Komatsu — BRAKE

STRUCTURE AND FUNCTION BRAKE BRAKE 1. Differential housing 5. Outer ring 2. Piston 6. Axle housing 3. Inner ring 7. Sun gear shaft 4. Disc 8. Bearing carrier Outline Inner ring (3) is installed to the notched portion of ! The brake is a wet type, single disc plate. It consist bearing carrier (8). Outer ring (5) is secured to axle of piston (2), inner ring (3), disc (4), and outer ring housing (6) by a pin. (5). There is a lining stuck to both sides of disc (4). The disc ! The brake cylinder consist of differential housing is assembled between inner ring (3) and outer ring (5), (1)and bearing carrier (8), with piston (2) assembled and is joined to the sun gear shaft by a spline. in it. 10-76