STRUCTURE AND FUNCTION PARKING BRAKE CONTROL PARKING BRAKE CONTROL 1. Parking brake pedal 4. Multiple disc brake lever 2. Parking brake release lever 5. Wire cable 3. Transmission Outline pulled up, the ratchet is disengaged and the brake ! The parking brake is a wet type, multiple disc brake is released. built into the transmission. Brake lever (4) is ! While the parking brake is being actuated, the flow connected by a wire cable to the parking brake of electricity to the transmission solenoid valve is pedal, and the brake is mechanically applied and shut off by the neutralizer relay, and the released. transmission is kept in neutral. !
When parking brake pedal (1) in the operator's compartment is depressed, brake lever (4) is pulled up and the brake is applied. The parking brake is held by a ratchet, so it is kept actuated. When the parking brake release lever is 10-78