STRUCTURE AND FUNCTION HYDRAULIC PIPING HYDRAULIC PIPING Outline ! The hydraulic system consists of the work equipment circuit and steering circuit. The work equipment circuit controls the operation of the bucket or other attachments. ! The oil from hydraulic tank (4) is sent from hydraulic pump (6) to priority valve (6). The amount of the oil flow is controlled and sent to main control valve (3). If the bucket and boom spools of main control valve (3) are at neutral, the oil passes through the drain circuit of the main control valve, is filtered by the filter inside the hydraulic tank, and returns to the tank. !
When the work equipment control lever is operated, the bucket or boom spool of the main control valve moves, oil flows from the main control valve to boom cylinder (1) or (8) or to bucket cylinder (2), and operates the boom or bucket. ! The maximum pressure of the hydraulic circuit is controlled by the relief valve inside the main control valve and the steering valve. A safety valve (with suction) is installed in the bucket cylinder circuit to protect the circuit. ! Hydraulic tank (4) is a pressurized sealed type and has a breather with a relief valve. It pressurizes the inside of the tank and also prevents negative pressure in order to prevent cavitation of the pump. 10-80