Komatsu — BREATHER

STRUCTURE AND FUNCTION HYDRAULIC TANK BREATHER 1. Cover 2. Sleeve 3. Spring 4. Spring 5. Poppet 6. Filter element Preventing negative pressure inside tank ! The tank is a pressurized sealed type, so if the oil level inside the hydraulic tank goes down, there will be negative pressure in the tank. If this happens, a sleeve (2) is opened by the difference between the pressure inside the tank and the atmospheric pressure, and air is let in to prevent negative pressure from forming inside the tank. Preventing rise in pressure inside tank !

If the pressure in the circuit rises above the set pressure during operations because of the change in the oil level in the hydraulic cylinders or the rise in the temperature, the poppet (5) is actuated to release the pressure inside the hydraulic tank. 10-87