Komatsu — BUCKET POSITIONER AND BOOM KICK-OUT

STRUCTURE AND FUNCTION BUCKET POSITIONER AND BOOM KICK-OUT Operation of proximity switch Boom RAISE switch Bucket TILT BACK switch ! If the boom goes below the set position for the boom ! If the bucket is dumped beyond the set position for kick-out, the detector (steel plate) is above the the bucket positioner, the detector (steel plate) is detector surface of the boom proximity switch, so the above the detector surface of the bucket proximity proximity switch sends the battery current to the switch, so the proximity switch sends the battery magnet switch coil. current to the magnet switch coil. ! When the work equipment control lever is operated !

When the work equipment control lever is operated to the RAISE position, the boom spool is held at the to the TILT BACK position, the bucket spool is held RAISE position by the magnet at the boom spool at the TILT BACK position by the magnet at the detent of the main control valve, and the boom rises. bucket spool detent of the main control valve, and ! When the boom rises and reaches the set position the bucket is tilted back. for the boom kick-out, the detector (steel plate) ! When the bucket tilts back and reaches the set separates from the proximity switch detector position for the bucket positioner, the detector surface.

When this happens, the proximity switch (steel plate) separates from the proximity switch cuts the electric current to the magnet coil. The detector surface. When this happens, the proximity boom spool is then returned to the neutral position switch cuts the electric current to the magnet coil. by the return spring. The bucket spool is then returned to the neutral position by the return spring. Action of proximity switch 10-108 POSITION Proximity switch When detector is positioned at detection surface of proximity switch When detector is separated from detection surface of proximity switch. Boom, bucket proximity switch Proximity switch sends electric current to magnet coil.

(magnet is actuated) Proximity switch cuts electric current to magnet coil. (magnet is not actuated)