STRUCTURE AND FUNCTION MAIN MONITOR TROUBLE DATA DISPLAY MODE 10-118 Item Switch operation Actuation Method of switching to trouble data display mode With engine stopped and starting switch turned ON, press 2nd switch from top on left side of main monitor (switch below emergency steering display) and working lamp (front) switch simultaneously for at least 5 seconds. All switch display (LEDs) go out, and failure code is displayed on speedometer display and time elapsed since failure is displayed on failure action code display. (1) Failure code is a two-digit display given in numbers or letters. The display for the failure now occurring flashes and the display for past failures lights up.
If there is no failure, CC is displayed (000 is displayed for time elapsed since failure) (2) The time elapsed since failure is displayed as a three-digit number to show how long ago the failure occurred (the oldest failure time is displayed. Any time greater than 999H is displayed as 999H). (3) A maximum of 9 items are stored in memory for the failure code. Method of sending failure code Press working lamp (front) switch Failure code and time elapsed since failure change to next item. Clearing failure code Press working lamp (rear) switch for at least 2 seconds Failure code and time elapsed since failure being displayed are cleared.
Failure code for problem now occurring (flashing display) cannot be cleared Resetting from travel data display mode Press 2nd switch from top left side of main monitor(switch below emergency steering display) and working lamp (front) switch simultaneously for at least 5 seconds, or start the engine. Changes to normal display