TROUBLESHOOTING METHOD OF USING TROUBLESHOOTING CHARTS The basic method of using the troubleshooting chart is as follows. Items listed for [Questions] and [Check Items] that have a relationship with the Cause items are marked with F , and of these, causes that have a high probability are marked with F" . Check each of the [ Questions] and [Check Items] in turn, and marke the F or F" in the chart for items where the problem appeared. The vertical column (Causes) that has the highest number of points is the most probable cause, so start troubleshooting for that item to make the final confirmation of the cause. 1.
For [Confirm recent repair history] in the Question section, ask the user, and mark the Cause column with a to use as reference for locating the cause of the failure. However, do not use this when making calculation to narrow down the causes. 2. Use the in the Cause column as reference for [Degree of use (Operated for long period)] in the Questions section as reference. As a rule, do not use it when calculating the points for locating the cause, but it can be included in necessary to determine the order for troubleshooting. 20-121 WA250-3L