TROUBLESHOOTING E-1 E-1 Engine does not start i If the front lamps or other electrical components are not working normally, carry out Troubleshooting (b) first. i To prevent failures, always turn the starting switch OFF when connecting or disconnecting connectors in order to connect the T-adapter (or socket adapter) or short circuit connector when carrying out checks. i When connecting the T-adapter (or socket adapter), connect to the connector specified in CNO ) ( ). i After checking, disconnect the T-adapter and connect the disconnected connectors immediately before going on to the next step unless otherwise specified. (a) check starting circuit 20-186 WA250-3L