DISASSEMBLY AND ASSEMBLY TRANSMISSION CONTROL VALVE 1. Disconnection Remove mounting bolts, disconnect upper valve (1) and lower valve (2), then remove gasket (3). 2. Disassembly of upper valve 1) Remove mounting bolts, remove cover (4), then remove gasket (5), pilot valve (6), priority spring (7), quick return valve assembly (8), accumulator piston (9), and spring (10). 2) Remove sleeve (11) from quick return valve assembly, then remove spring (12) and ball (13). 3) Remove plug (14) from sleeve (11).
4) Remove mounting bolts, remove cover (15), then remove gasket (16), main regulator valve (17), spring (18), priority valve (19), modulating valve assembly (20), accumulator shaft (21), and springs (22) and (23). 5) Remove load pistons (24) and (25) from main regulator valve (17) and priority valve (19). 6) Remove plug (26) from modulating valve assembly (20), then remove retainer (27), springs (28) and (29), sleeve (30), and O-ring (31). 7) Remove nut (32) and washer (33) from cover (15), then remove adjustment screw (34) and O-ring (35). 8) Remove plug (36) and main orifice (37) from upper valve (1). 3.
Disassembly of lower valve 1) Remove mounting bolts, remove solenoid valve assembly (38), then remove spring (39), retainer (40), spring (41), and sleeve (42). 2) Remove mounting bolts, remove cover (43), then remove gasket (44), torque converter regulator valve (45), shim (46), spring (41A), sleeve (42A), F-R selector valve (47), H-L selector valve (48), range selector valve (49), spring (50), and spacer (51). 3) Remove mounting bolts, then remove pilot filter (52) and O-ring (53). 4) Remove plug (54) from F-R selector valve (47). 5) Remove plug (55) from lower valve (2) and cover(43). 6) Remove orifice (56) from lower valve (2). 30-93 WA250-3L