Komatsu — ASSEMBLY

DISASSEMBLY AND ASSEMBLY TRANSMISSION CONTROL VALVE 1. Assembly of lower valve 2. Assembly of upper valve 1) Fit orifice (56) to lower valve (2). 1) Fit plug (36) and main orifice (37) to upper valve Ъ Turn in the orifice until it clears the body by (1). 2 mm or longer. Ъ Turn in the orifice until it clears the body by 2mm or longer. 2) Fit plug (55) to lower valve (2) and cover (43). Plug: Selector (LG-1 or LG-5) Plug: Selector (LG-1 or LG-5) 2) Fit adjusting screw (34) together with O-ring (35) to cover (15) and also fit washer (33) and nut (32) to cover (15). Ъ See "Testing and adjusting Volume" for the adjusting procedure.

3) Fit plug (26) to modulating valve ass'y (20); fit O- ring (31) to sleeve (30) and then fit springs (28), (29) and retainer (27). 4) Fit load pistons (24), (25) to main regulator valve (17) and priority valve (19). 5) Fit springs (22), (23), accumulator shaft (21), modulating valve ass'y (20), priority valve (19), 3) Fit plug (54) to forward-reverse selector valve (47). spring (18) and main regulator valve (17) to cover (15); and then mount cover (15) with gasket (16) 4) Fit O-ring (53) to pilot filter (52) and mount the suitably fitted in position. pilot filter in position by tightening its mounting Mounting bolts: bolt. 68.6 ± 4.9 Nm (7.0 ± 0.5 kgm) Mounting bolt:

68.6 ± 4.9 Nm (7.0 ± 0.5 kgm) 6) Fit plug (14) to sleeve (11), set ball (13) and spring (12) to quick return valve (8) and then 5) Fit H-L selector valve (48), range selector valve mount sleeve (11). (49), spacer (51), spring (50), forward-reverse selector valve (47), sleeve (42A), spring (41A), 7) Fit spring (10), accumulator piston (9), quick shim (46) and torque converter regulator valve return valve ass'y (8), priority spring (7) and pilot (45), and then mount cover (43) with gasket (44) valve (6) to cover (4). Then mount cover (4) with suitably fitted in position. gasket (5) suitably fitted in piston. Mounting bolt: Mounting bolts:

68.6 ± 4.9 Nm (7.0 ± 0.5 kgm) 68.6 ± 4.9 Nm (7.0 ± 0.5 kgm) 6) Fit sleeve (42), spring (41), retainer (40and spring Connect lower valve (2) and upper valve (1) together (39), and mount solenoid valve ass'y (38) to lower with gasket (3) suitably fitted in position. valve (2) with gasket suitably fitted in position. Mounting bolts: Mounting bolt: 31.4 ± 4.9 Nm (3.2 ± 0.5 kgm) 68.6 ± 4.9 Nm (7.0 ± 0.5 kgm) 3. Connecting 30-95 WA250-3L