Komatsu — 2ND, 4TH CLUTCH

STRUCTURE AND FUNCTION TRANSMISSION Operation of clutch When operated ! The oil sent from the transmission valve passes through the oil passage inside shaft (1), and goes to the rear face of piston (6) to actuate the piston. ! When piston (6) is actuated, separator plate (2) is pressed against clutch disc (3) and forms shaft (1) and clutch gear (4) into one unit to transmit the motive force. ! Oil is drained from oil drain hole (5) at this time, but this does not affect clutch operation since less oil is drained than supplied. When not actuated ! If the oil from the transmission valve is shut off, the pressure of the oil acting on the rear face of piston (6) drops. !

The piston is returned to its original position by wave spring (7), so shaft (1) and clutch gear (4) are separated. ! When the clutch is disengaged, the oil at the rear face of the piston is drained by centrifugal force through oil drain hole (5), preventing the clutch from remaining partially engaged. 10-18