Komatsu — REMOVAL

DISASSEMBLY AND ASSEMBLY PRIORITY VALVE PRIORITY VALVE REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. WARNING! , Loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then operate the steering wheel and control levers several times to release the remaining pressure in the hydraulic piping. ! Loosen the plug at the top of the hydraulic tank filter to prevent the oil inside the hydraulic tank from flowing out. For details, see REMOVAL OF TRANSMISSION, TORQUE CONVERTER. 1.

Remove covers (1) and (2) under cab, and covers (3) and (4) at top of hydraulic tank. 2. Hydraulic piping 1) Disconnect hose (5) between steering valve and hydraulic tank at steering valve end. 2) Disconnect hose (6) between steering valve and priority valve at steering valve end. 3) Disconnect hose (7) between priority valve and hydraulic tank at hydraulic tank end. 4) Disconnect hose (8) between priority valve and steering valve at steering valve end. 5) Disconnect 2 hoses (9) between tube and main control valve at tube end. 30-159 WA250-3L