DISASSEMBLY AND ASSEMBLY HYDRAULIC CYLINDER HYDRAULIC CYLINDER DISASSEMBLY 1. Set cylinder assembly (1) to tool H . 2. Raise lock of cylinder head (2), and using tool I , remove cylinder head (2) from cylinder. 3. Pull out cylinder head and piston rod assembly (3) from cylinder (4), then lift off. Ъ Oil will come out when the piston rod assembly is removed from the cylinder, so prepare a container to catch the oil. 4. Remove cylinder (4) from tool H . 5. Set cylinder head and piston rod assembly to tool H , and using tool J , remove nut (5). Ъ Tool J : 6. Remove piston assembly (6) and cylinder head assembly (7) from rod (8).
30-186 WA250-3L Cylinder Width across flat (mm) Boom Cylinder 70 Buckey Cylinder 80 Steering Cylinder 36