DISASSEMBLY AND ASSEMBLY COUNTERWEIGHT COUNTERWEIGHT REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. 1 . Open grill and disconnect connector (1). 2. Sling grill (2) and remove left and right mounting bolts (3). 3. Lift off grill together with plate (4). 4. Sling counterweight (5), then remove mounting bolts and lift off. Ъ Be careful to maintain the balance when lifting the counterweight off. Counterweight: 1,390 kg INSTALLATION ! Carry out installation in the reverse order of removal.
Ъ When installing the counterweight into the mounting position, be careful not to bump any of the lamps. Mounting bolt: 539.4 ± 58.8 Nm (56.0 ± 6.0 kgm) (width across flats: 30 mm) 30-195 WA250-3L