DISASSEMBLY AND ASSEMBLY MAIN MONITOR MAIN MONITOR REMOVAL WARNING! Stop the machine on level ground and install the safety bar on the frame. Lower the bucket to the ground and stop the engine. Then apply the parking brake and put blocks under the wheels to prevent the machine from moving. WARNING! Disconnect the cable from the negative (-) terminal of the battery. 1 . Remove dashboards (1) and (2). 2. Remove steering post cover mounting bolts (3) an d (4). 3. Remove steering post cover (5). 4. Remove mounting bolt caps (7) of steering post cover (6), then remove bolts. 5. Remove mounting bolt caps from steering post cover (8), then remove mounting bolts (9).
Ъ Tip the steering post cover to the front. 6. Remove bracket (10) at back of main monitor. 30-200 WA250-3L