Komatsu — PILOT REDUCING VALVE

STRUCTURE AND FUNCTION TRANSMISSION CONTROL VALVE TRANSMISSION SOLENOID VALVE Function ! There are four solenoid valves installed to the transmission control valve. When the gear shift lever in the operator's compartment is operated, the solenoid valves are switched ON/OFF, and the oil is drained to actuate the gear shift spool. Operation 1 . Solenoid valve OFF The oil from pilot reducing valve (3) flows to ports a and b of gear shift spools (1) and (2). The oil at ports a and b is stopped by solenoids (4) and (5), and gear shift spools (1) and (2) move to the right in the direction of the arrow. As a result, the oil from the pump flows to the 2nd clutch. 2.

Solenoid valve ON When the gear shift lever is operated, the drain port of solenoid valves (4) and (5) opens. The oil at ports a and b of gear shift spools (1) and (2) flows from ports c and d to the drain circuit. Therefore, ports a and b become the low pressure circuit, and the gear shift spool is moved to the left in the direction of the arrow by the tension of spring (6). As a result, the oil at port e flows to the 4th clutch and the clutch is switched. 10-31