STRUCTURE AND FUNCTION PRIORITY VALVE 1. Steering wheel at neutral When the engine is stopped, spool (3) is pushed fully to the left by the tension of spring (4). The circuit between ports M and N is fully open, while the circuit between ports M and Q is fully closed. In this condition, if the engine is started and the steering pump is rotated, the oil from the pump goes from port M to port N, and then enters port A of the steering valve. The oil entering port A is throttled by orifice a, so the pressure in the circuit rises. When this happens, the oil passing through orifice m in spool (3) enters port P.
It then compresses spring (4), and moves spool (3) to the right in the direction of the arrow. This stabilizes the condition so that the circuit between ports M and Q is almost fully open and the circuit between ports M and N is almost fully closed. Therefore, the oil from the pump almost all flows to the work equipment circuit. 2. Steering wheel turned to left When the steering wheel is turned to the left, an angle variation is generated between the spool and sleeve of the steering valve, and the oil flow is switched. (For details, see STEERING VALVE.) The oil from the pump flows from port M to port N, and enters port A.
The degree of opening of the sleeve (port A) and spool (port B) creates a difference between the pressure up to port A and the pressure beyond port B. Some of the oil from port B flows to the Girotor, and then goes to the front right cylinder. The remaining oil passes through orifice b, flows to port J, and then enters port R. When this happens, spool (3) stabilizes at a position where the differential pressure between the circuit up to port A and circuit beyond port B (pressure of port P - pressure of port R) and the load of spring (4) are balanced. It adjusts the degree of opening from port M to ports N and Q, and distributes the flow to both circuits.
The ratio of this distributed flow is determined by the degree of opening of port A and port B, in other words, the angle variation between the sleeve and spool of the steering valve. This degree of opening is adjusted steplessly by the amount the steering wheel is turned. 10-60