Key to Symbols 1.00.11 © 2002 / 0297 9763 Disassembly of assembly groups Guard against personal injury Indication of hazard Reassemble to form assembly group Guard against material damage Damage to parts Remove obstructing parts Prop up - Support - Hold Reinstall - Remount parts which had obstructed disassembly Oil Attention! Important notice! Grease Check - Adjust e.g. torque, dimensions, pressures, etc. Mark before disassembly, observe marks when reassembling Special tool Balance Eliminate any imbalance Note direction of installation Filling - Topping up - Refilling e. g. oil, cooling water, etc. Visual inspection Drain off e. g. oil cooling water, etc.
Possibly still serviceable Renew if necessary Loosen - Release e. g. loosening a clamping device Renew at each reassembly Tighten - Clamp e. g. tightening a clamping device Unlock - Lock e. g. splint pin, locking plate, etc. Vent Lock - Adhere e.g. with liquid sealant Machining process