daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

(8) Apply force to the tensioner in the direction shown by arrow to make the belt engage completely with each sprocket. Tensioner 6EN0017 (9) Tighten the tensioner attaching bolt to the specified torque. (10) Tighten the tensioner spacer to the specified torque. Tensioner spacer NOTE: If the nut is tightened first, the tensioner may also turn together with the nut and loose tension of the belt may result. Always tighten the bolt (at the bottom of the tensioner) first and then tighten the nut (at the top of the tensioner).

Tensioner 6EN0015 (11) Hold the center of the tension side span of the timing belt (between the camshaft and oil pump sprockets) between your thumb and index finger as shown. Then, make sure that the clearance between the belt back surface and cover meets the standard value. Standard value: 14 mm (0.55 in.) 14mm (0.55in) 6EN0616 G424 Service Manual Base Engine Service Procedure 128