daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

B Crankshaft bearing installation (1) From the following table, select a bearing whose size is appropriate for the crankshaft journal outside diameter. 6EN0705 If the crankshaft journal outside diameter ID color is “yellow” and the cylinder block bearing bore ID mark is “1” for example, select a bearing whose ID mark is “2” or ID color is “yellow” for No. 1, 2, 4 and 5, and a bearing whose ID mark is “1” or ID color is “green” for No. 3. If there is no ID color paint on the crankshaft, measure the journal outside diameter and select a bearing appropriate for the measured value.

Bearing bore identification mark Cylinder inner diameter size mark Rear face of cylinder block Bottom of cylinder block 6EN1632 G424 Service Manual Base Engine Service Procedure 165 Crankshaft journal outside diameter Cylinder block bearing bore Crankshaft bearing for No.3 Identification mark or color Identification color Size mm (in.) Identification mark Identification mark or color Identification mark or color Yellow 56.994 to 57.000 (2.2439 to 2.2241) 0 1 or Green 0 or Black 1 2 or Yellow 1 or Green 2 3 or None 2 or Yellow None 56.988 to 56.994 (2.2436 to 2.2439) 0 2 or Yellow 1 or Green 1 3 or None 2 or Yellow 2 4 or Blue 3 or None White 56.982 to 56.988 (2.2434 to 2.2436) 0 3 or None 2 or Yellow 1 4 or Blue 3 or None 2 5 or Red 4 or Blue