daewoo G20E-3, G25E-3, G30E-3 — Daewoo G20E-3, G25E-3, G30E-3 — спецификация (EN)

Engine Noise No definite rule or test will positively determine the source of engine noise. Therefore, use the following information only as a general guide to engine noise diagnosis. 4. Try to isolate the noise to location in engine, front to back, top to bottom. This can help determine which components are at fault. 1. Use a timing light to determine if noise is timed with engine rpm or one-half engine rpm. Noises timed with engine rpm are related to crankshaft, rods, pistons, piston pins or flywheel. Noises timed to one-half engine rpm are valve-train related. 5. Sometimes noises can be caused by moving parts coming in contact with other components. Examples are:

flywheel, crankshaft striking (pan and pan baffle), rocker arm striking valve cover or loose flywheel cover. In many cases, if this is found to be the problem, a complete engine teardown is not necessary. 2. The use of a stethoscope can aid in locating a noise source. However, because noise will travel to other metal parts not involved in the problem, caution must be exercised. 6. When noise is isolated to a certain area and component, removal and inspection will be required. Refer to proper sections of service manual for pertinent information. 3. If noise is believed to be confined to one particular cylinder, ground the spark plug leads one at a time.

If noise lessens noticeably or disappears, it is isolated to that particular cylinder. Symptom Cause 1. Noise around the A. Rocker arm striking valve cover. valve cover area. B. Rocker arm out of adjustment. C. Worn rocker arm. D. Bent push rod. E. Collapsed lifter. 2. Noise around the A. Sticking valve. cylinder area. B. Carbon build-up. C. Connecting rod installed wrong. D. Bent connecting rod. E. Piston. F. Piston rings. G. Piston pin. H. Cylinder worn. 3. Noise around camshaft A. Loss of oil pressure. area (throughout engine). B. Valve lifters. C. Cam bearings. 4. Noise in camshaft area A. Camshaft timing gear. area (front of engine). B. Timing Belt. C. Valve lifter. D. Cam bearings.

G424 Service Manual Adjustment and Troubleshooting 174