LP FUEL SYSTEM General Description Electric Fuelock Model . 3 6 7 2 2 3 1 4 1 5 5 IDES061P LP Fuel System Components (1) Converter. (2) Fuelock. (3) Carburetor. (4) Coolant ontlet line (5) Coolant inlet line. (6) Balance hose. (7) LP fuel line to carburetor IDES062S engine coolant that flows in line (5) and out line (4). Carburetor vacuum activates the converters operation and the fuel flows to the carburetor through line (7). From carburetor (3), the vapor fuel goes through the inlet manifold to the combustion chamber of the engine. In the combustion chamber, the spark made by the spark plug will "ignite" (cause to burn) this vapor.
Balance hose (6) keeps the correct air and fuel mixture in the carburetor when there is some restriction in the air cleaner. LP Fuel System Components The basic components of this liquid petroleum (LP) fuel system are: the fuel tank, the fuel filter and relief valve, fuelock (2), converter (1) and carburetor (3). Liquid fuel is sent to fuelock (2) by the pressure in the fuel tank, which is approximately 1030 kPa (150 psi). Fuelock (2) permits fuel flow to the converter when electrically activated by the oil pressure switch. LP fuel flows into converter (1), which changes the fuel to a vapor. The fuel receives heat in the converter from the G424 Service Manual LPG Fuel System 73 6 7