Specifications Specification Item Number of cylinders 2,3,4,50r6 Direction of rotation Clockwise/counterclockwise (viewed from the drive side) Maximum allowable speed (pump) 3000 r.p.m (2, 4, 5 cylinders) 2500 r.p.m (3, 6 cylinders) Plunger diameters Injection timing control 8,9, 1011 0r 12 mm speed timer 2,4, 5 cylinders: 11° Maximum 3, 6 cylinders: 7° Maximum Load Timer Maximum: 3° to 4° Speed-load timer 2,4, 5 cylinders: 11° Maximum 3, 6 cylinders: 7° Maximum Speed governing Variable speed governor (All speed governor) Minimum-maximum Speed droop Weight Approx.
5.5 kg Lubrication system Fuel oil lubrication Control lever position Right or Left side of governor cover (viewed from the drive side) Right or Left side of governor cover (viewed from the drive side) Stop lever position Maximum allowable in-pipe pressure _ speed governor (limited speed governor) Combination governor (Half-all soeed governor) 4% (750 r.p.m.) Engine reverse rotation prevention Approx. 550 kg/cm? Because the inlet port opens during the compression Stroke if the engine rotates in the reverse direction, fuel cannot be delivered and injection cannot occur. Additional devices Installation of boost compensator, pump speed sensor, cold start device etc. is possible.