eng — USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE

. MAINTENANCE USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE MAINTENANCE USE OF FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE REMARK When fuel sulphur content is less than 0.5%, change oil in the oil pan according to the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulfur content is above 0.5%. When starting the engine with an atmospheric temperature of lower than 0 ° C (32 ° F), be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though the atmospheric temperature goes up to 10 ° C (50 ° F) more or less during the day.

Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature range in the table. We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydraulic work equipment applications. Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. ASTM: American Society of Testing and Material SAE:

Society of Automotive Engineers API:

American Petroleum Institute 4 - 15 Engine oil pan Dumper case Jaw crusher motor bearing case Final drive case (each on right and left) Grizzly feeder vibrator case Specified oil amount (Bypass filter installed) liters 38 (41) 0.75 8.1 10 15 US gal 10.04 (10.83) 0.20 2.14 2.64 3.96 Refill oil amount (Bypass filter installed) liter 34 (37) - 8.1 9.5 15 US gal 8.98 (9.78) - 2.14 2.51 3.96 Conveyor motor machinery case Hydraulic oil system Fuel tank Cooling system Specified oil amount liters 2.5 370 605 43.9 US gal 0.66 97.75 159.84 11.6 Refill oil amount liters 2.5 270 - - US gal 0.66 71.93 - - Fuel sulfur content Engine oil change interval 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval