. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS completes the clock setting. CORRECT TIME SETTING 1. When the time is displayed, depress clock switch (B) for 2.5 sec or more. 2. Symbol (A) flashes. 3 - 15 4. When H switch (D) is pressed, the hour advan ces, and when M switch (E) is switches are ke will advance co pressed, the minutes advance . If the H or M pt pressed for more than 2.5 sec onds, the time ntinuously. 5. When the corre ct time is reached, press clock s witch (B). This 3. When SET swit ch (C) is pressed, the hour is ro unded off fo r 0 to 14 minutes a [Examples] 10:14 becomes 10:45 becomes If the set switc standard clock, immediately).
nd rounded up for 45 to 59 min 4. After setting th complete the se REMARK If the machine has a fault, error information appears while the N. The monitor flashes and displays all error tially. I f starting switch is O information sequen SERVICE METER This monitor (6) in dicates the total number of hours that the operated. r periodic maintenance according to the time machine has been Set the intervals fo display. The service meter advances while the starti ng switch is on even if the machine is not moving. The meter will ad vance by 1 for each hour of operat ion regardless of the engine sp eed.