. OPERATION EXPLANATION OF COMPONENTS 3 - 29 REVOLVING WARNING LAMP (Yello The revolving warning asions. Shoul d two more take the revolv ing warning lamps light on and off in the order of (1), (2) and (3) as indicated i n the table below . Refer t o the right column in the table f or the different way s that th e revolvin g warning lamps ligh t on and of f according to the No. Item of Abnormality Display of Revolving Working Lamp (1) Engine water temperature abnormal (over 105°C degrees) Revolving working lamp keeps flashing, if any of abnormalities listed at left takes place.
(When the cause is removed, the lamps goes off) Engine oil temperature abnormal Battery charging level abnormal Residual fuel amount abnormal (below 70 liter (18.49 US gal)) Radiator cooling water level abnormal Engine oil level abnormal Hydraulic oil level abnormal Air cleaner abnormally clogged If the following is detected, while grizzly feeder is in operation. (2) Excessive load on primary belt conveyor If any of abnormalities listed at left takes place, the lamp goes on. (When the cause is removed, the lamp goes off) Excessive load on crusher Excessive load on debris discharging conveyor Over feed sensor activated (3) Primary belt conveyor in raised (traveling) posture The lamp goes on.
(If the conveyor is in LOWER position, the lamp goes off)