STANDARD GAUGES Water Temperature Gauge Engine Overheating face, hands, and arms by covering the cap with a large, thick rag to protect you against escaping fluid and steam. Before you completely remove the cap, carefully and slowly turn the cap part way to allow excess pressure to escape. Then push down and turn for final removal. WARNING! Do not remove the radiator fill cap while the engine is hot. Scalding steam and fluid under pressure may escape and cause serious personal injuries. You could be badly burned. Wait until the coolant temperature is below 122°F (50°C).
The cooling system may overheat if the coolant level is below normal or if there is a sudden loss of coolant (such as a worn hose splitting). It may also temporarily overheat during severe operating conditions such as climbing a long hill on a hot day or stopping after high-speed driving. 3 The water temperature gauge shows the temperature of the engine coolant. Under normal operating conditions the water temperature gauge should register between 165° and 205°F (74° and 90°C). Under certain conditions, somewhat higher temperatures may be acceptable. But the maximum allowable temperature is 210°F (99°C) with the cooling system pressurized, except for certain special engines.
Check your engine manual to be sure. Protect face, hands, and arms by covering the cap with a large, thick rag to protect against escaping fluid and steam. Carefully and slowly turn the cap one-quarter of a turn or until it reaches the first stop— allowing excess pressure to escape—push down and turn for final removal. If the "Engine Coolant Temperature" warning light comes on, or you have any other reason to suspect the engine may be overheating: Stop the vehicle, but DO NOT TURN OFF THE ENGINE unless a Wait until the coolant temperature is below 122° F (50°C). Protect your (03/17) Y53-6060-1C1 3-35