HEATING AND AIR CONDITIONING Tips for Efficient Cooling How To Use The System Fresh Air/Recirculation Switch An air conditioner can reduce fog build up on the windshield by setting it to the defrost or the floor/defrost air selection. To increase the effectiveness of the air conditioner, use the A/C button in the ON position, increase the air temperature setting and/or increase the fan speed. The engine must be running for the heater and air conditioner to generate hot and cold air.
This switch controls the source of the air flowing into the heater and air conditioner unit Recirculated air may reduce the amount of time needed to cool down the interior of the vehicle (when used with A/C) and may also help reduce undesired outside odors from reaching the interior of the vehicle. This button can be engaged manually in any non-defrost modes. To Cool 3 Push the Fresh Air/Recirculation Switch to the Fresh Air mode (Blue indicator light off). Manually setting the system to recirculate air will increase the effectiveness and uses the least amount of fuel.
If the cabin becomes humid or damp, use the air conditioner with the fan on, with fresh air (not in recirculate air mode) and the A/C in the ON position to dry the cabin air. NOTE You may notice changes in sound between recirculated mode and other airflow modes. Turn ON the Fan Control Dial to the desired fan speed. In situations where more cooling of the cab is required, make sure the system is in the recirculation mode. This setting will be more effective than using fresh air. Turn Temperature Dial to Desired Setting. 3-66 Y53-6060-1C1 (03/17)