OPERATING THE ENGINE WARNING! Winterfronts Do not work on or near the fan with the engine running. Anyone near the engine fan when it turns on could be injured. If it is set at MANUAL, the fan will turn on any time the ignition key switch is turned to the ON posi- tion. In AUTO, it could engage sud- denly without warning. Before turn- ing on the ignition or switching from AUTO to MANUAL, be sure no work- ers are near the fan. Do not operate the engine fan in the MANUAL position for extended periods of time. The fan hub was designed for intermittent operation. Sustained operation will shorten the fan hub's service life as well as re- duce fuel economy.
NOTE A winterfront or other air flow restriction device may be mounted in front of the radiator to increase cab heater temperature in cold climates. CAUTION A winterfront should only be used at temperatures below 40°F (4°C). Use of a winterfront above 40°F (4°C) can decrease life of cool- ing module components. Remove winterfront as soon as the ambi- ent temp reaches 41°F (5°C). The use of a winterfront above 40°F (4°C) can result in excessive engine coolant, oil, and charge air (intake) temperatures, which can lead to overheating and possible engine or coolant module damage and emis- sions non-compliance.
4 CAUTION The fan or equipment near it could be damaged if the fan turns on sud- denly when you do not expect it. Keep all tools and equipment away from the fan. 4-12 Y53-6060-1C1 (03/17)