OPERATING THE BRAKE SYSTEM Brake Components The brake system is a critical vehicle safety system. For the safety of you and others around you, have the ve- hicle submitted for periodic preven- tive maintenance checks as well as having any suspected problems im- mediately checked by an Authorized Service Center. Failure to properly maintain your brake system can lead to serious injury accidents. WARNING! The following is a brief description of the hydraulic brake system. It is intended to supply you with general information on how the system works. For complete information see the Peterbilt Medium Duty Maintenance Manual. Brake Master Cylinder:
translates brake pedal force into hydraulic fluid pressure in the primary and secondary circuits. Brake Pedal: applies actuation force from operator's foot to the master cylinder pistons. Anti-Lock Brake System (ABS) Modulator Valve Body: adjusts brake fluid flow between the master cylinder and the wheel calipers to avoid wheel lockup. Brake Warning Lamp: illuminates when either power steering fluid flow is interrupted or when a pressure differential is present in the primary and secondary brake fluid pressure. Either case adversely affects braking operation. 4 ABS Warning Lamp: lights when the ABS controller detects wheel lock-up while driving and activates the ABS.
Lights also when a fault in the ABS is detected. Differential Switch: measures the hydraulic fluid pressure difference between the primary and secondary circuits. Brake Fluid Reservoir: stores brake fluid and offers a place to replenish when needed. Electrohydraulic Pump: The Electrohydraulic (EH) pump is used as a backup boost pump. The EH pump turns on and provides fluid pressure 4-36 Y53-6060-1C1 (03/17)