Peterbilt Medium Duty — Hydraulic Brakes

OPERATING THE BRAKE SYSTEM 4. Turn on the emergency flasher and use other warning devices to alert other motorists. Wet or Overheated Brakes If the buzzer sounds while driving, or if the BRAKE light comes on, do the following: Wet Brakes If you have been driving in heavy rain or deep standing water, your brakes will get wet. Water in the brakes can cause them to be weak, to apply unevenly, or to grab. These conditions can cause a lack of braking power, wheel lockups, or pulling of the vehicle to one side or the other. 1. Slow down carefully. Here are some things you can do to assist in slowing the vehicle: ° Downshift - Putting the transmission into a lower gear will help slow the vehicle.

4 ° Pump the brakes - Pumping the brake pedal may generate enough hydraulic pressure to stop the vehicle. Avoid driving through deep puddles or flowing water if possible. If not possible, you should to the following: ° Use the parking brake - The parking or emergency brake is separate from the hydraulic system. Therefore it can be used to slow the vehicle. Slow down. Place transmission in lower gear. Gently press on the brake pedal. Increase engine speed while keeping light pressure on the brake pedal for a short distance to dry out the brake linings. 2. Move a safe distance off the road and stop. 3. Set the parking brake. 4-38 Y53-6060-1C1 (03/17)