AXLE Starting-Up WARNING! When going downhill the wheels will not slow down, but will tend to speed up, which makes gear synchronization almost impossible. As a result, the axle is neither in HIGH nor LOW range and all engine/driveline retardation is lost. Without engine retardation it is more difficult to slow the vehicle down and greater stress is put on the brake system. 1. Unlock the inter-axle differential before starting. Never shift the axle when moving downhill. Engine driveline disen- gagement may occur, eliminating engine retardation and allowing the wheels to spin faster than the cur- rent speed of the engine.
This may require severe braking to slow the vehicle down and can result in an ac- cident. Failure to comply may result in death, personal injury, equipment or property damage. 2. Put the Range Selector in the LOW range. Shift the transmission to start the vehicle moving. 3. When you are driving on rough terrain and secondary roads, or under a very heavy load, keep the axle in the LOW range. Shift the transmission to maintain proper road speed. CAUTION 4 Proper shifting of the axle depends on the synchronization of engine/driveline and wheel speed. When you shift the axle, the connection between the engine and wheels is momentarily disengaged while the gearing is synchronized.
Normally when the axle is shifted the speed of the engine, axle, and wheels adjust, allowing for proper gear engagement. To avoid damaging your vehicle shift the axle at slower travel speeds until you are used to driving with a dual range axle. (03/17) Y53-6060-1C1 4-49