Peterbilt Medium Duty — Maintenance Schedule

PREVENTIVE MAINTENANCE SCHEDULE 5 5-26 Y53-6060-1C1 (03/17) PREVENTIVE MAINTENANCE (PM) INTERVALS SYSTEM COMPONENT MAINTENANCE TASK Recommended PM Interval I A B C Power Steering Reservoir Check the fluid level (shown on page 5-52). X Reservoir Drain, replace the filter, and refill (shown on page 5-52). X Steering gear Check the lash of the sector shaft; adjust as required. X Grease the trunnion bearing (EP NLGI #2 lithium-based, moly-filled, HD grease). X Grease the input shaft seal (EP NLGI #2 lithium-based, moly-filled, HD grease). X Power assist cylinder Lubricate the ball joints. Inspect for leaking rod seals, damaged ball joint boots, and damage to cylinder rod or barrel.

X Hoses and tubes Check for leaks and chafing. X Steering linkage Check all joints for excessive lash; replace as required (shown on page 5-138). X Draglink tube clamp and ball socket Check the torque; tighten to specified torque value as required. X