ELECTRICAL Electrical and Alternator Precautions When charging the battery (installed in the vehicle) disconnect the battery cables. Remote Keyless Entry The remote keyless entry system may become inoperational due to a key fob battery. If you have issues with a key fob, replace the battery and re-synchronize the key fob. In some situations, the key fob may need to be replaced and in others, a fuse may have failed and may render both key fobs inoperative. Take the following precautions to avoid burning out alternator diodes: Do not reverse the cables of the alternator, starter motor, or battery. Do not start the engine with alternator disconnected (connections removed) from the circuit.
Do not polarize the alternator. The alternator should not be polarized like a generator. To ensure correct polarity, use a test lamp or a voltmeter. Before welding, disconnect all electronic connections to the vehicle batteries. Contact your dealer for more help if a key fob does not work and it is not because of a bad battery. Remove battery power cable and insulate it from the vehicle. 5 Do not run the engine with the batteries disconnected. Do not disconnect the battery cables or alternator connection cables with the engine running. Never turn the ignition switch from the ON position to the START position with the engine running. 5-98 Y53-6060-1C1 (03/17)