Peterbilt Medium Duty — Engine Mounting

ENGINE ServiSignal™Mini Indicator Exhaust System Engine Mounting The ServiSignal™Mini Indicator is installed on the air cleaner or air induction piping so it has access to clean filtered air. As the filter plugs and restriction increases, a red flag appears in the window. When it reaches the red zone, the air filter should be replaced. The indicator can be reset by pressing the button at the end of the indicator. The exhaust system is part of the noise and emission control system. Periodically check the exhaust for wear, exhaust leaks, and loose or missing parts. For details see Noise and Emission Control on page 5-122. Periodic Inspection:

Inspect engine mounts every 60,000 miles (96,560 km). Check for the following: Inspect both mount and leg fasteners. Check for loose or broken bolts. Replace as necessary. Please refer to the Engine Operator's Manual for more details on how to maintain the emission's components in the exhaust system. Check mount and leg for fractures, breaks or deformation. Replace as necessary. Check for complete insertion of motor mount. Replace as necessary. 5 New leg to mount flange head bolts should be torqued to 210-230 Lb-Ft (284-311 Nm). (03/17) Y53-6060-1C1 5-107