NOISE AND EMISSION CONTROL Exhaust System Joints and Clamps Selective Catalyst Reduction (SCR) Check for exhaust leaks, which would indicate a leaking manifold gasket; replace gasket if necessary. Check for leaks, and tighten as necessary. Check for deterioration or dents in pipes and clamps which could allow exhaust to escape. Check SCR canister filter, clamps and mounting brackets. Tighten if necessary. Inspect SCR canister for signs of rust or corrosion. Check cap screws for tightness, including those at the flanges. Refer to the engine manufacturer's service manual for proper tightening sequence and torque values.
Replace any serviceable joints, flexible pipes and gaskets at the service intervals. 5 (03/17) Y53-6060-1C1 5-125