TRANSMISSION AND CLUTCH Manual Transmissions of oil circulated by the motion of gears and shafts. Service Intervals Manual transmissions are designed so that the internal parts operate in a bath For recommended types and brands of all lubricants, see the transmission manufacturer's Service Manual 5 Standard Transmission Oil Level Clutch System Introduction Thus, free pedal and free travel are directly related to each other. NOTE Free pedal is the distance the clutch pedal moves by applying only slight pressure. During free pedal the release yoke in the transmission moves until its bearing pads contact the release bearing. This movement of the release yoke is called free travel.
As the clutch pedal is depressed further, with harder pressure, the release yoke moves the release bearing away from the engine. This causes the clutch plate to release from the driven disks in the clutch. This is The vehicle must be parked on level ground. Maintain the oil level and check it regularly. Oil should be up to bottom of filler plug hole. 5-156 Y53-6060-1C1 (03/17) MODEL RECOMMENDED LUBRICANT (See Note) AMBIENT TEMPERATURE RANGE VISCOSITY (SAE) DEG. C DEG. F Eaton-Fuller HD engine oil: API CE or CF-4. Above -12 Above +10 50 Synthetic oil: Chevron RPM Synthetic Transmission Fluid, or equal, meeting MIL-L-2104D and Eaton PS-081 specifications.
Above -40 Above -40 50 NOTE Do not use multi-viscosity or EP (extreme pressure) gear oil (e.g., axle oils) in transmissions. Multi-viscosity or EP oils may damage components.