Peterbilt Medium Duty — Driver's Check List

START-UP Daily Checks b. Replace belts that are cracked torn or broken. Chassis and Cab Checks - Daily 1 Engine Compartment Checks - Daily Before entering the cab and operating the vehicle, check the following equipment for proper maintenance: 1. Engine Fluid Levels - add more if necessary. 3. Fuel Filter/Water Separator Draining - check and drain. Depending on the fuel storage facility, more frequent draining may be required. 1. Lights - are any exterior lights cracked or damaged? a. Engine oil b. Coolant (check while engine is cold) 4. Windshield washer reservoir fluid level - fill if necessary. 2. Windows and Mirrors - are they clean and adjusted properly? c. Power steering fluid level 5.

Battery Cables - check the condition of the battery and alternator cables for signs of chafing or rubbing. Make sure that all clamps (straps) holding the cables are present and in good working order. 3. Tires and Wheels - are they inflated properly? Are all wheel cap nuts in place and torqued properly - tighten if necessary. Check front wheel bearing oil levels. Inspect all tires and wheels for damage - correct if found. 2. Engine Belt - check tension and condition of belts. a. See Accessory Drive Belts on page 5-102 for further information on checking belt tension. 4. Suspension - check for loose or missing fasteners.

Check damage to springs or other suspension parts such as cracks, gouges, distortions, bulges or chafing. NOTE 6. Hood closed before entering cab. Is it latched properly? Deflection should be one belt thick- ness for each foot distance between the pulley centers. 7. Check brake lines and hoses. 8. Check the steering components (pitman arm, draglink, power steering hoses, etc.). (03/17) Y53-6060-1C1 1-33