Peterbilt Medium Duty — Vehicle Recovery Guidelines

VEHICLE RECOVERY AND SPRING BRAKES VEHICLE RECOVERY AND SPRING BRAKES the lubricant in the top front of the drive axle will drain to the rear. This will leave the top components dry. The resulting friction may damage them. Always remove the main drive axle shafts before towing your vehicle. If your vehicle has a Meritor axle with a driver-controlled main differ- ential lock, install the caging bolt be- fore removing the axles for towing, see Driver Controlled Main Differen- tial Lock on page 2-16. Installing the caging bolt prevents damage by locking internal axle components in position.

CAUTION Vehicle Recovery Guidelines 2 Your vehicle is equipped with removable Recovery Hitches, designed for short distance recovery purposes only. Use only the provided hitches, according the following instructions. When using this connection, do not transport your vehicle over long distances. (If your vehicle does not have the proper hitches, contact your dealer.) CAUTION Remove the drive axle shafts or lift the driving wheels off the ground be- fore towing the vehicle. Towing the vehicle with either the wheels on the ground or the axle shafts in the axles will cause damage to the axle gears. CAUTION Connect only to the Recovery Hitches, see Vehicle Recovery Guidelines on page 2-12.

Connec- tions to other structural parts could damage the vehicle. Do not attach to bumpers or brackets. Use only equipment designed for this pur- pose. Failure to comply may result in equipment damage. All lubricating and clutch application oil pressure is provided by an engine-driven pump, which will not work when the engine is stopped. You could seriously damage your vehicle by towing it with the driveline connected and the drive wheels on the ground. Worse, when vehicles are towed, either by wrecker or piggyback, 2-12 Y53-6060-1C1 (03/17)