VEHICLE RECOVERY AND SPRING BRAKES This action will lock the differential by pushing a piston into a "lock" position. A recovered vehicle will have no op- erational brake system. Additionally, the rear axle spring brakes will prob- ably be applied. CAUTION Connect recovery rigging only to hitches intended for that purpose. Do not attach to bumpers or brack- ets. Connections to other structural parts could damage the vehicle. CAUTION CAUTION Failure to install the caging bolt when towing vehicles with driver-control main differential lock can result in damage by failing to lock internal components in position.
2 If you desire to use the recovered vehicle’s brakes, ensure that the vehicles air system is connected to that of the recovery vehicle. Also ensure that any air line that has been removed from a driver-controlled main differential lock is firmly capped to prevent loss of air pressure from the recovery vehicle. WARNING! Ensure there are no open air lines on the recovered vehicle if the re- covery vehicle and recovered vehicle brake systems are connected. An open air line on the recovered vehi- cle will cause a leak in the air brake system of the recovery vehicle pos- sibly causing death, personal injury, equipment or property damage.
If you don’t desire to use the recovered vehicle’s brakes, ensure that you cage the spring brakes before attempting to move the vehicle. 4. Install recovery hitches and rigging. (03/17) Y53-6060-1C1 2-17