Peterbilt Medium Duty — Tachometer

STANDARD GAUGES Odometer / Trip Meter odometer is "9999.9" before it rolls over to zero. Tachometer The LCD display in the lower part of the speedometer contains the odometer and trip meter. Your tachometer measures the engine speed in revolutions- per-minute (RPM). The tachometer also includes an engine hour meter and outside air temperature display. To reset the trip odometer, press and hold the trip reset button on the speedometer. The numbers will reset to 0 and begin to count new miles/km traveled. This also resets the trip values in the Driver Information Display. 3 The odometer displays the total distance your vehicle has traveled.

It will display in miles on an English speedometer or in kilometers on a metric speedometer. The maximum distance that can be shown on the odometer is "1 999 999" before it rolls over to zero. The trip reset button also toggles all displays between English and Metric. NOTE The Odometer/Trip Meter comes on when the door is opened or the key is in the accessory or ignition position. The Odometer/Trip Meter will remain on for 3 seconds after the door is closed or the ignition switch is turned off. This allows driver and service personnel to read the odometer without ignition switch being turned on. The trip odometer displays how far the vehicle has gone on a particular trip.

The trip odometer will display in miles on an English speedometer or in kilometers on a metric speedometer, in one tenth divisions. The maximum distance that can be shown on the trip Watching your tachometer is important to driving efficiently. It will let you match driving speed and gear selection to the operating range of your engine. If your engine speed gets too high, you can select a higher gear to lower the RPM. If your engine speed drops 3-32 Y53-6060-1C1 (03/17)