Polaris Industries Inc. MSX — Polaris Industries Inc. MSX User Manual

MAINTENANCE AND LUBRICATION Steering Cable Inspection 1. The handlebars and steering nozzle should operate smoothly. If movement is stiff, see your authorized Polaris dealer for service. 2. Turn the handlebars from lock to lock and check to be sure that the clearances between the steering nozzle and the rear hull are even on both sides. If the alignment is not even, see your authorized Polaris dealer for service. Throttle Cable Inspection 1. Depress and release the throttle lever. It should return to its initial position smoothly. If it doesn’t, see your authorized Polaris dealer for service. 2. Throttle lever free-play should not exceed .020 -.060 (.5-1.5 mm).

If it does, see your authorized Polaris dealer for service. Fuses The NGI is protected by a 2 amp fuse. There are also two 15 amp inline fuses on the chassis harness for the fuel pump and any battery powered accessories. After changing a fuse, always reinstall the weathertight cover to keep the fuses dry. Battery Fuel Pump NGI 15AMP F A 15AMP 2AMP .020-.060 (.5-1.5 mm) 85