hitachi — T03-06-01to16.pdf

SYSTEM / Controller Engine Control Engine Control Dial Control, Controls the engine speed according to the rotation angle of engine control dial. HP Mode Control Slightly increases digging power such as arm roll-in operation while excavating deeply . Travel Speed Increase Control Increases the engine speed and travels faster during travel single operation. Travel Speed Limit Control Reduces engine speed to 1650 min -1 during travel single operation in Fast in order to protect the travel motor by decreasing travel speed. E Mode Control Reduces the target engine speed to 1580 min -1 in maximum in order to reduce fuel consumption.

Auto-Idle Control Reduces the engine speed to 1030 min -1 in 3.5 seconds when all the control levers are in neutral with the auto-idle switch ON. Therefore, fuel consumption and noise level can be reduced. Attachment Operation Speed Increase Control (Optional) Set attachment operation speed (breaker) to increase (+) with Dr. ZX. When operating the attachment, engine speed increases to the attachment operating speed set by Dr. ZX. Attachment Operation Speed Decrease Control (Optional) Set attachment operation speed (breaker) to decrease (-) with Dr. ZX. When the attachment mode is selected, engine speed decreases to the attachment operating speed set by Dr. ZX. T2-1-4